Roadware 10 Minute Concrete Mender Instructions Page 3

ROADWARE 10 CONCRETE MENDER™

300ML X 300ML CARTRIDGE APPLICATION INSTRUCTIONS

Home - Products - Applications - Sales Literature - E-mail Roadware

Tools Required

Cartridge Assembly

Start-up Procedure

Crack and Joint Repair

Spall Repair

Recapping Partial Cartridges

Troubleshooting, Clean-up and Disposal

Cartridge Start-up Procedure

Hold cartridge upward and load into gun. Bleed off any air inside the cartridge by slightly squeezing handle and rocking the cartridge from side to side as needed to force the air bubble out through the mixer.

Immediately point mixer into a waste container and dispense a small amount to start the material mixing.

CAUTION: DO NOT POINT MIXER UPWARD AFTER MATERIAL IS FLOWING! This may cause Back-flo and clogging.

Apply material immediately. with study full strokes of the gun.

Tools Required Cartridge Assembly Start-up Procedure Crack and Joint Repair Spall Repair Recapping Partial Cartridges Troubleshooting, Clean-up and Disposal

Home - Products - Applications - Sales Literature - E-mail Roadware

`©2001` Roadware Incorporated, All Rights Reserved, The information within this website is for the sole use of Roadware customers and interested parties. Alteration and duplication is prohibited without written consent from Roadware, Inc.

Hold cartridge upward and load into gun. Bleed off any air inside the cartridge by slightly squeezing handle and rocking the cartridge from side to side as needed to force the air bubble out through the mixer.
Immediately point mixer into a waste container and dispense a small amount to start the material mixing.
CAUTION: DO NOT POINT MIXER UPWARD AFTER MATERIAL IS FLOWING! This may cause Back-flo and clogging.
Apply material immediately. with study full strokes of the gun.

ROADWARE 10 CONCRETE MENDER™

300ML X 300ML CARTRIDGE APPLICATION INSTRUCTIONS

Cartridge Start-up Procedure

©2001 Roadware Incorporated, All Rights Reserved, The information within this website is for the sole use of Roadware customers and interested parties. Alteration and duplication is prohibited without written consent from Roadware, Inc.

Please direct comments or questions regarding this website to the Roadware Webmaster.

`©2001` Roadware Incorporated, All Rights Reserved, The information within this website is for the sole use of Roadware customers and interested parties. Alteration and duplication is prohibited without written consent from Roadware, Inc.