ROADWARE 10 CONCRETE MENDER™ 300ML X 300ML CARTRIDGE APPLICATION INSTRUCTIONS
	Home - Products - Applications - Sales Literature - E-mail Roadware
Tools Required Cartridge Assembly Start-up Procedure Crack and Joint Repair Spall Repair  Recapping Partial Cartridges Troubleshooting, Clean-up and Disposal

Cartridge Assembly

Each cartridge comes standard with a static mixer, flow controller, retaining nut, D-plugs, and protective overcap.
Step 1: Remove the protective overcap. FLOW CONTROLLER is stowed under the overcap.
Step 2: Remove black D-plugs and save.
Step 3: Place the FLOW CONTROLLER on top of the cartridge. Be careful to align the holes in the flow controller with the material openings.
Step 4: Seat the static mixer over the FLOW CONTROLLER and secure with black retaining nut.
Step 5: Tighten firmly with hands. KEEP CARTRIDGE UPRIGHT UNTIL USE.

Tools Required

Cartridge Assembly

Start-up Procedure

Crack and Joint Repair

Spall Repair

Recapping Partial Cartridges

Troubleshooting, Clean-up and Disposal

Home - Products - Applications - Sales Literature - E-mail Roadware

©2001 Roadware Incorporated, All Rights Reserved, The information within this website is for the sole use of Roadware customers and interested parties. Alteration and duplication is prohibited without written consent from Roadware, Inc.