Roadware Molding And Tack Strip Cement Technical Information

ROADWARE

Molding And Tack Strip Cement

Bond moldings and tack strips in 15 minutes!

HOME | TECHNICAL INFORMATION | APPLICATION INSTRUCTIONS | PRESS ROOM | CONTACT US

Technical

Information

Description:
Roadware Molding And Tack Strip Cement™ is a two component hydrophobic hybrid polyurethane system for bonding tack strips and moldings to concrete or wood floors. This material forms a tough weather resistant bond that resists cracking or splitting due to heavy traffic or harsh conditions.

Features:

Completely cures in 15 - 20 minutes after application for heavy traffic at 70° F. Will also cure rapidly in subzero environments.
Excellent bonding strength in a wide temperature range to concrete, brick, tile, steel, asphalt, and wood.
Remains flexible.
Excellent chemical resistance.
All material is self-mixed and delivered at the point of application. No messy pot-mixing or wasted product.
Safe to use. Materials react quickly and are solvent and odor free with 100% solids and no VOC's. Nonflammable.

Benefits:

Save labor, carpet can be laid in 15 minutes after application at 70° F. No return trips are necessary.
Long lasting repairs that accommodate harsh physical environments and thermal movement.
Odor free and nonflammable, can be used in a wide range of indoor areas.
Easy application. All material is self-mixed with specially designed packaging or bulk application equipment.

Uses:

Bonding tack strips to concrete or wood floors
Bonding carpet moldings to concrete or wood floors.
Bonding stair nosings to concrete, wood, or steel stairs.
Repairing concrete cracks and spalls.

Application:

Start with clean and dry concrete.

Apply two small beads for moldings or a dab every six inched for tack strips.

Lay the molding into place and let the MATS cure for 15 minutes at 70 degrees F.

Open up to traffic immediately.

Cartridge Part Number	MATS300	MATS050
Cartridge Capacity	300ml	50ml
Cartridges per case	8	12
Cartridge yield taclkess strip (estimated)	150 ft	25 ft
Cartridge yield Moldings (estimated)	50 - 100 ft	8 - 16 ft
Properties	Part A	Part B	Mixed
Cartridge size	150ml x 150ml	25ml x 25ml
Brookfield Viscosity	1400 cps	700 cps	1200 cps
Color	Black	White	Grey
Pot Life (@100gm)			4 mins
Gel Time: (Tack Free)			<15 mins
Mixing Ratio	1	1	by volume
Compressive Sheer (Wet) Aged 24 hours	1595 psi
Tensile Strength (ASTM D412)	1726 psi
Ultimate Elongation (ASTM D412)	1.8
Tear Strength (ASTM D624)	25 N/mm
Hardness	70-80 Shore A
Adhesion (Peel Strength - ASTM D903)	80 lb/inch width

For Manufacturers Safety Data Sheets (MSDS), click here.

For more information please email or call:

Steve Hayes at CMI 1-800-288-8322

Kelton Glewwe at Roadware 800-522-7623

HOME | TECHNICAL INFORMATION | APPLICATION INSTRUCTIONS

Manufactured by:

:
Roadware M.A.T.S. is distributed nationally by:

	Start with clean and dry concrete.
	Apply two small beads for moldings or a dab every six inched for tack strips.
	Lay the molding into place and let the MATS cure for 15 minutes at 70 degrees F.
	Open up to traffic immediately.