| ROADWARE |
| Molding And Tack Strip Cementtm |
| Bond moldings and tack strips in 15 minutes! |
HOME | TECHNICAL INFORMATION | APPLICATION INSTRUCTIONS | PRESS ROOM
|
|
"Three times I sent our people back to make a nosing repair. I even went myself. Nothing we tried had worked. Then I remembered MATS, Molding And Tack Strip cement. Problem solvedno more revisits." Dan Meyers, President of Mendota Flooring Installation |
Roadware Molding and Tack Strip Cement is designed to fully bond
moldings in only 15 minutes. No more waiting for hours for caulk-like
construction adhesives to set. You can go home that night confident
the repair will hold because after 15 minutes, you can kick it
with your foot, open it to traffic, or lay the carpet in.
How do they do it? By utilizing the latest in rapid polyurethane technology, Roadware developed a two-part polyurethane that forms a flexible polymer bond to wood, concrete, metal, VCT, ceramic or neoprene. The key to the polymer's success comes from the flexibility of the bond. Because the material is polyurethane based, it will never become brittle or "dry out" like epoxies or construction adhesives. The flexibility allows the bond to absorb the shock of heavy traffic when most adhesives would eventually crack apart and come loose.
Roadware Molding and Tack Strip Cement™ is packaged in easy to apply twin cartridges that mix the components as they are dispensed. This eliminates waste and allows partially used cartridges to be stored and used another day. By packaging the material in special cartridges, installers need not worry about mixing buckets and material setting up before it can be used. The material is nonflammable and may be applied at temperatures well below freezing.
Contact: Barbara O'Brien
Director, Media Relations
Roadware, Inc.
800-522-7623
http://www.roadwareinc.com/mats