Home - Featured Applications - Flexible Cement II Bridge Header
Featured Application
 |
||||||||||||||
| Side "B" material is pre mixed prior to application. | ||||||||||||||
 |
||||||||||||||
| One gallon of side "B" is poured into mixing can. | ||||||||||||||
 |
||||||||||||||
|
One gallon of side "A" is poured into mixing can. |
||||||||||||||
 |
||||||||||||||
| The material is mixed with a drill mixer until the color is a uniform gray (about 30 seconds). | ||||||||||||||
 |
||||||||||||||
| The mixed Flexible Cement II is poured into the sandblasted and cleaned repair area. | ||||||||||||||
 |
||||||||||||||
|
Clean and dry aggregate is seeded into the repair at one inch intervals. The repair is finished with a top coat of material. Repairs are ready for traffic in 15 minutes after application at 70 degrees F. Repairs can be made at temperatures ranging from 0 degrees F to 100 degrees F. |
||||||||||||||
Home - Featured Applications - Flexible Cement II Bridge Header
Roadware Incorporated
381 Bridgepoint Drive
South St. Paul, MN 55075
Contact:
Kelton Glewwe
VP Marketing Operations
Richard King II
VP Sales and Distribution
Toll Free:
800-522-7623
Telephone:
651-457-6122
Fax:
651-457-1420
e-mail: Kelton Glewwe