Concrete Mender™ Cartridge Assembly Instructions

Click here for Roadware 50ml Cartridge Application Tool Instructions #5150

How to assemble and prepare the Roadware 10 Minute Concrete Mender 600ml 1:1 cartridge for use.

Please review these instructions carefully. Each cartridge will come packed in a moisture-resistant bag with a standard static mixer, a retaining nut, and a flow controller under the clear packing cap.

Roadware 10 Minute Concrete Mender 80300 600ml Cartridge
Roadware 10 Minute Concrete Mender 80300 600ml Cartridge with standard mixer and flow controller

 

Hold cartridge upright
Hold cartridge upright
Remove clear overcap
Remove clear over cap
Note the flow controller under the over cap
Remove the black D shaped plugs and keep for later
Remove the black D shaped plugs and keep for later

 

Place the flow controller in alignment with the cartridge openings
Place the flow controller in alignment with the cartridge openings NOTE Concrete Mender™ uses a flow controller Flexible Cement II and MatchCrete™ Clear do not
Make sure flow controller is aligned properly
Make sure flow controller is aligned properly
Place static mixer over flow restrictor and cartridge openings
Place static mixer over flow restrictor and cartridge openings
Place retaining nut over the static mixer
Place retaining nut over the static mixer
Secure retaining nut
Secure retaining nut
Hold cartridge upright and place in the application gun
Hold cartridge upright and place in the application gun
Hold cartridge upright and slightly squeeze the application gun to bleed off any excess air in the cartridge
Hold cartridge upright and slightly squeeze the application gun to bleed off any excess air in the cartridge
Tilt the cartridge from side to side and squeeze slightly to bleed off excess air in the cartridge
Tilt the cartridge from side to side and squeeze slightly to bleed off excess air in the cartridge
Dispence a small amount of material to start the mixing process KEEP CARTRIDGE POINTED DOWN ONCE MATERIAL IS FLOWING
Dispense a small amount of material to start the mixing process KEEP CARTRIDGE POINTED DOWN ONCE MATERIAL IS FLOWING
Depress thumb trigger to stop material flow
Depress thumb trigger to stop material flow

Concrete Mender™ Cartridge Application Instructions

The focused keyphrase: cartridge assembly, 2k, 600ml Concrete Mender, 80300 must appear naturally in this text.

Flexible Cement II™ Cartridge Application Instructions

MatchCrete™ Clear Cartridge Application Instructions

Commercial and Industrial Concrete Repair Products